Checkout

  Home > Power Products > Water Pumps > Gas >

1-1/2" High Pressure Water Pump
1-1/2" inch High Pressure Water Pump


 
Alternative Views:
Price: $344.98


Product Code: 40ZB60-4.8QT
Qty:

Description
 
These high pressure water pumps are perfect for small farm owners, sprinkler systems, firefighting, washing down equipment, lawn and pool maintenance. With a 1-1/2" inlet/outlet port, a cast iron volute, and an aluminum impeller, this high pressure gas water pump can easily transfer massive amounts of clean water. Automatic engine stall when low oil sensor is triggered to prevent engine damage. Highest Quality!
No sales to California.

  • This
  • high pressure water pump is perfect for sprinkler systems,
  • firefighting, emergency water supply, and washing down equipment. With 1-1/2" inlet/outlet ports, a cast iron volute, and an aluminum impeller,
  • this pump can easily transfer up to 4800 GPH (80 GPM) of clear or dirty
  • water and can filter solids up to 3/16" in diameter.

    • Maximum head suction of 10 ft; maximum lift of 360 ft.
    • Smooth running and long lasting
    • air-cooled, four-stroke overhead valve 6.5 HP, single-cylinder self-
    • priming engine with centrifugal pump and EPA/CARB certification for low
    • emissions requirements
    • Low oil shutdown
    • 1 gallon gas tank with estimated run time of 3 hours
    • Safety gas valve for transport
    • Strong cast aluminum pump housing keeps this compact pump lightweight for maximum portability
    • Heavy duty corrosion-resistant roll cage for protection and stability
    • Anti-reverse flow flap on inlet port


  • Engine displacement: 196cc; Speed: 3600 RPM; Horsepower: 6.5; Overall dimensions: 15-5/8" L x 20-7/8" W x 17-3/4" H
    Weight: 63.66 lbs    .

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
Great little fire pump!! June 6, 2018
Reviewer: Christopher Hinds from Mancos, CO United States  
I bought this pump for a 200 gallon fire trailer.  It doesn't put out quite enough pressure to get into standard firefighting Class 4-7 ratings, as it tops out about 95PSI, but it's soooo close that I figured I'd give it a shot.
It puts out good pressure at mid-throttle settings without making too much fuss.  At full throttle, it'll put out ~95psi at 0GPM, and I clocked it at about 15GPM at 80PSI, which is pretty good for my needs.    It starts well if you choke it (Even warm, it likes to choke...)   I installed an electric start kit for a Honda GS160 and it works perfectly.     Great little pump for the money.        Oh, and I bought a cheap tap kit and re-threaded the connections to pipe.  The thread pitch was the same, but it comes with straight threads instead of pipe taper...

Was this review helpful to you?


Browse for more products in the same category as this item:

Power Products > Water Pumps > Gas
Power Products > Water Pumps
Power Products