Briggs & Stratton 356776-0006-G1
18hp Vertical Shaft Engine
V-Twin Vanguard Motor
Crankshaft Extension: 1" x 3-5/32" Length, Tapped 7/16" - 20, 1/4" KeywaySupersedes 356776-0006, 356776-0046, 350776-1046, 356776-3046 and 356776-0013
Maintaining a fleet of commercial mowers, or even just one, can be a challenge. From keeping everything running smoothly on a daily basis to finding the specific parts that need replacing over time, there's a lot to keep track of. If you’re looking for a motor that offers reliable performance specifically for commercial mowers, this Briggs & Stratton 18 HP recoil start motor is what you need to get back in business. Its features include a forced air cooling system for optimal efficiency, as well as a mechanical governor for safety and control. Although it is the perfect replacement engine for many engines on wide-area walk-behind mowers, this Briggs & Stratton gas motor comes with recoil start and 570cc so you can expect dependable power on both your riding or walk-behind mower.
The 18 HP Briggs & Stratton Vanguard comes with a three-year warranty for commercial use, so its quality is assured. Order now and get it shipped for free from Carroll Stream Motor Company!
Replaces many engines on walk behind mowers including some Scag SWZ Hydro- Drive Zero Turn mowers and older model Exmark walk behind mowersSpecifications | |
---|---|
Make | Briggs & Stratton |
Model | 356776-0006 |
Type | Small Engine |
Fuel | Gas Unleaded 86 Octane or Higher |
Engine Type | 4 Stroke OHV V-Twin |
Bore/Stroke | 2.83X 2.76 in |
Displacement | 570cc |
Max Power | 18HP |
Starting Type | Recoil Start |
Charging System | 9AMP |
Starting System | Heavy Duty Recoil |
Dimensions (L x W x H) | 17.5 x 19 x 20 in. |
Muffler Included | No |
Fuel Tank | No |
Dry Engine Weight | 83 lbs. |
Shaft Type | Keyed - Straight |
Shaft Diameter | 1" Diameter, 1/4" Keyway |
Shaft Length | 3-5/32" Total |
Shaft I.D. Thread Size | 7/16"-20 Drilled and Tapped |
Bolt Pattern | 4 Bolt |
Oil System | Pressure lubrication, Oil Cooler |
Oil Capacity | 48ozs |
Intake | Low Vacuum Purge Port |
Reduction Type | None |
Engine Cooling Type | Forced Air Cooling |
Features | |
3 Year Limited Consumer Warranty | |
3 Year Limited Commercial Warranty | |
Mechanical Governor | |
4 Stroke OHV Small Engine | |
Dual clean Air Filter | |
Dipstick in Crankcase | |
Cross Reference Guide | |
Kohler: ZT720 | |
Accessories | |
Throttle Linkage Kit | |
User Manual |
Our Selection of Briggs & Stratton Vertical Engines:
- 21R807-0072-G1 Intek Series 11.5HP Vertical Shaft
- 356776-0006-G1 18HP Vertical Shaft
- 33S877-0019-G1 Intek Series 19HP Vertical Shaft
- Commercial Turf Series 40T876-0002-G1 20HP Vertical Shaft
- 44T977-0009 25HP Vertical Shaft
- 44S977-0032 Professional Series 25HP Vertical Shaft
- 44S977-0033 Professional Series 25HP Vertical Shaft
- 49R977-0004 Vanguard 26HP Vertical Shaft
- 49T877-0004-G1 28HP Vertical Shaft
- 49E877-0005-G1 28HP Vertical Shaft
Discover Our Briggs & Stratton Horizontal Options:
- 15C112-3007 Snow Professional Series 250cc Horizontal Shaft
- 550 Series 083132-1035-F1 5.5HP Horizontal Shaft
- 130G52-0182-F1 XR950 Series 6.5HP Horizontal Shaft
- 950 Series 13R232-0001-F1 6.5HP Horizontal Shaft
- 13L332-0036 Vanguard 6.5HP Horizontal Shaft
- 13L352-0049 Vanguard 6.5HP Horizontal Shaft
- 1450 Series 19N132-0035-F1 10HP Horizontal Shaft
- 19L232-0036-F1 Vanguard 10HP Horizontal Shaft
- 1150 Series 15T212-0160-F8 11.5HP Horizontal Shaft
- 305447-0523-F1 16HP Horizontal Shaft
- 305447-3079 Vanguard 16HP Horizontal Shaft
- 31R907-0006-G1 17.5HP Horizontal Shaft
- 25T237-0045-F1 21HP Horizontal Shaft
- 386447-0514-G1 Vanguard 23HP Horizontal Shaft
- 386447-3079-G1 Vanguard 23HP Horizontal Shaft
- 613477-0242 Vangaurd 35HP Horizontal Shaft